Skip to content
AtomicHobbies

Small hobbies for the gaps in your day.

All hobbies
Craftsbeginner15 minutes

Paper Blind Bags

A is a sealed little pouch with a surprise inside: you only find out what you got when you tear it open. Making your own takes half a sheet of printer paper, some tape and a pen, and the surprise is a tiny card you draw yourself. Make one to give away today, then build a whole series for friends or kids to collect.

What you'll do

Cut half a sheet of printer paper into a pouch blank and two mini cards, fold the blank into a flat tube, draw a snack-bag style front and a series checklist on the back, draw a tiny surprise card, then tape the bag shut with the card hidden inside and snip a tear notch so it opens like a real blind bag.

A small paper pouch with crimped bands top and bottom and a star on the front, its top strip torn off to show a tiny surprise card peeking out.

At a glance

Time
15 minutes for your first session
Cost
Nothing to buy. It uses things you already have at home.
You need
One sheet of printer paper, Clear tape, Scissors, Markers, colored pencils or a pen, A ruler or a bank card

What you need

Required

  • One sheet of printer paper × 1 sheet, US letter (8.5 x 11 inches) or A4; half makes this bag and the other half a second one · $0 · household

    White printer paper takes markers well. Thin colored paper or a page of a paper grocery bag also works. Avoid cardstock and cereal-box card for the bag itself: they crack at the folds and are hard to tear open.

    Alternatives: Any thin paper of the same size, such as a notebook page or a flattened paper bag

  • Clear tape × About 30 cm (12 inches), in 3 pieces · $0 · household

    Any clear sticky tape or washi tape. Packing tape works too but is hard to tear by hand, so cut it with scissors.

    Alternatives: A glue stick (hold each glued seam pressed for 30 seconds), Washi tape or masking tape

  • Scissors × 1 pair · $0 · household

    For cutting the sheet, the mini cards and the tear notch.

  • Markers, colored pencils or a pen × At least 1 dark pen; 2 or 3 colors make the front look like a real package · $0 · household

    A black pen or marker for outlines matters most. Colors are a bonus.

    Alternatives: Crayons, Highlighters

  • A ruler or a bank card × 1 · $0 · household

    Used to measure one 5.4 cm (2 1/8 inch) strip. The short side of any standard bank, gift or ID card is exactly that wide, so a card does the job without a ruler.

    Alternatives: A library card or hotel key card (same size as a bank card)

Nice to have

  • Washi tape or stickers × 1 roll or 1 sheet · $2-5 · purchased

    Patterned tape makes the seals look finished, and a real sticker is a nice extra surprise next to the drawn card.

  • Pinking shears × 1 pair · $7-15 · purchased

    Scissors with zigzag blades give the top and bottom edges the jagged look of a real snack-bag seal. Not needed to start.

How to do it

  1. Fold the sheet in half so the short edges meet, crease, and cut along the fold. Put one half away for a second bag. Lay the other half on the table with its long edge running left to right: it is about 21.5 x 14 cm (8 1/2 x 5 1/2 inches). Lay a bank card on the left end with its short side along the bottom edge, mark the paper at the card's right edge, slide the card up to the top edge and mark again, join the two marks with a line, and cut along it. You now have a bag blank about 16 x 14 cm (6 3/8 x 5 1/2 inches) and a strip about 5.4 x 14 cm (2 1/8 x 5 1/2 inches). Fold the strip in half end to end and cut on the fold to get two mini cards about 5.4 x 7 cm (2 1/8 x 2 3/4 inches). It worked if you have one wide rectangle and two small cards the size of a matchbox. Common mistake: cutting the strip off the long edge instead of the short end, which leaves the blank too short to fold into a bag.

    Show help

    Tip: Common mistake: drawing the surprise in light pencil. Printer paper is thin, and a pale drawing that faces the front can show through the bag and spoil the surprise. Use dark ink and turn the drawn side toward the back seam before sealing.

  2. Lay the blank with its long edges at top and bottom. Fold the left edge in toward the middle so it lands about 1 cm (3/8 inch) past the center, and crease the left side sharply with a fingernail. Fold the right edge in over it so the two edges overlap by about 1 cm, and crease the right side. Don't tape yet. Turn the flat tube over: the smooth side with no seam is the front of your bag. It worked if the tube is about 7.5 cm (3 inches) wide and 14 cm (5 1/2 inches) tall, the two side folds are straight and parallel, and a mini card slides in with room to spare. Common mistake: folding the edges so they only meet in the middle with no overlap. Then the has nothing to tape onto and splits open. Unfold and refold the right side so the edges overlap.

    Show help

    back seam: The overlapping join that runs down the back of a pouch, where the two edges of the paper are taped together.

    Tip: Common mistake: drawing the surprise in light pencil. Printer paper is thin, and a pale drawing that faces the front can show through the bag and spoil the surprise. Use dark ink and turn the drawn side toward the back seam before sealing.

  3. With the tube still folded flat and the front facing up, draw a light pencil or pen line 2 cm (3/4 inch) from the top edge and another 2 cm from the bottom edge. These bands will be the sealed ends, so keep your drawing between the lines. Draw the front like a real : a big name across the top (for example "MYSTERY CRITTERS"), one large simple character or a big question mark in the middle, and a small "Series 1" in a corner. Fill the background with one bold color if you can. Turn the tube over and, on the back beside the seam, write a short checklist: "Collect all 3:" followed by 3 small names such as Cat, Frog, Mushroom, plus "Rare: ???". It worked if the front reads clearly from arm's length and nothing is drawn inside the 2 cm bands. Common mistake: tiny, pale details. A blind bag front is a poster; one big shape in thick lines reads better than lots of fine drawing.

    Show help

    series checklist: The list on the back of a blind bag that shows every character in the set, so collectors know what they might get.

    Tip: Common mistake: drawing the surprise in light pencil. Printer paper is thin, and a pale drawing that faces the front can show through the bag and spoil the surprise. Use dark ink and turn the drawn side toward the back seam before sealing.

  4. Pick one name from your checklist and draw that character big on one mini card, filling most of it, in thick outlines with a dark pen. Underneath write its name and a small detail such as "No. 2 of 3". On the back of the card write a one-line message for the person who will open it, for example "You pulled Frog!". Keep the second mini card for your next bag, or draw a tiny bonus on it, like a paper charm or a fake sticker with a border drawn around it. It worked if the card is finished on both sides and still slides into the tube without bending. Common mistake: drawing the surprise in pale pencil on thin paper, so it shows through the bag. Use dark ink and keep the drawn side facing the in the next step.

    Show help

    pull: Collector slang for the item you got when you opened a blind bag or pack.

    Tip: Common mistake: drawing the surprise in light pencil. Printer paper is thin, and a pale drawing that faces the front can show through the bag and spoil the surprise. Use dark ink and turn the drawn side toward the back seam before sealing.

  5. Tape the : lay one 11 cm (4 1/2 inch) strip of tape along the overlap, starting at the bottom edge and stopping about 3 cm (1 1/4 inches) below the top edge, so no tape crosses the tear line you add in step 6. Or glue the overlap and press it for 30 seconds. Close the bottom: lay a 9 cm (3 1/2 inch) strip of tape along the bottom edge on the front, half on the paper and half hanging off, then fold the hanging half over onto the back and press, so the tape wraps the edge. Slide the card in from the top with its drawing facing the back of the bag, then push it down to the bottom. Close the top the same way as the bottom. Hold the bag up to a lamp or window. It worked if the card stays hidden, nothing slides out when you shake it, and the bag feels flat and closed at both ends. If you can see the drawing through the front, open the top, wrap the card in your spare mini card or a folded scrap, and tape it again. Common mistake: taping only across the front of the end, which leaves the back open at the corners. Always wrap the tape over the edge onto the back.

    Show help

    Tip: Common mistake: drawing the surprise in light pencil. Printer paper is thin, and a pale drawing that faces the front can show through the bag and spoil the surprise. Use dark ink and turn the drawn side toward the back seam before sealing.

  6. On the top and bottom 2 cm bands of the front, draw short lines straight up and down, about 5 mm (1/4 inch) apart, so they look like the crimped seal on a foil snack bag. On one side fold, just below the top band, snip a tiny 5 mm (1/4 inch) cut into the bag from the edge: this is the where the bag starts to rip. Don't cut into the tape. It worked if the bag looks like a little packaged pouch and a tug at the notch would tear across below the top band, above the end of the seam tape and well above your surprise at the bottom. Common mistake: snipping the notch inside the top band, through the tape, so the bag tears open only with scissors. You did it: you have a sealed ready to hand to someone. Next session, use the other half sheet to make 2 more bags with the other characters on your checklist, so the series can be collected.

    Show help

    crimp lines: The rows of tiny ridges pressed into the sealed ends of foil and plastic packets. Here they are drawn on with a pen.

    tear notch: A small cut in the edge of a sealed packet that gives a tear a starting point, so it opens by hand.

    Tip: Common mistake: drawing the surprise in light pencil. Printer paper is thin, and a pale drawing that faces the front can show through the bag and spoil the surprise. Use dark ink and turn the drawn side toward the back seam before sealing.

Paper Blind Bags · Step 1 of 6

Tips

  • Common mistake: drawing the surprise in light pencil. Printer paper is thin, and a pale drawing that faces the front can show through the bag and spoil the surprise. Use dark ink and turn the drawn side toward the before sealing.

  • Before you seal a bag, always hold it up to a lamp. If anything shows, wrap the surprise in a scrap of colored paper first. A bold background color on the front hides the contents too.

  • Make a series, not just one bag. Three to five characters on the back checklist plus one "rare" make each bag feel like a real , and the person opening it wants the next one.

  • Write the names of what's inside on a sticky note before sealing a batch, or mark each bag with a tiny dot code on the bottom band, so you know which ones you have already given.

  • Keep each bag flat with only one or two flat items inside. Lumpy fillers like coins or candy tear thin paper bags; put those in a bag made from a paper grocery bag instead.

Glossary

blind bag
A small sealed package with a toy or collectible inside that you can't see until you open it.
back seam
The overlapping join that runs down the back of a pouch, where the two edges of the paper are taped together.
series checklist
The list on the back of a blind bag that shows every character in the set, so collectors know what they might get.
pull
Collector slang for the item you got when you opened a blind bag or pack.
crimp lines
The rows of tiny ridges pressed into the sealed ends of foil and plastic packets. Here they are drawn on with a pen.
tear notch
A small cut in the edge of a sealed packet that gives a tear a starting point, so it opens by hand.

Communities

Resources

Frequently asked questions

Do I need a printer or a printable template?

No. The measurements on this page replace a template: half a sheet of letter or A4 paper, with a strip the width of a bank card cut off one end, folds into the bag. Printable templates are handy for making many identical bags later, but you don't need one to start.

How much does it cost to make blind bags?

Nothing to buy for a first bag: one sheet of printer paper makes two, plus a little tape and a pen. Washi tape or stickers are optional extras, at about $2 to $5 for a roll or a sheet.

What can I put inside besides a drawn card?

Anything flat and small enough to fit a 6 x 10 cm (2 1/2 x 4 inch) space: a sticker, a folded paper charm, a tiny origami shape, a riddle, or a coupon for a favor. Puffy paper squishies fit in a larger bag made from a whole half sheet without trimming.

Why does my bag show what's inside?

Printer paper is thin. Turn the drawn side of the surprise toward the back seam, wrap it in a scrap of colored paper, or color the front of the bag with a dark, solid background. Check by holding the bag up to a lamp before you seal the top.

My bag won't tear open neatly. What went wrong?

Tape over the tear line stops the rip. Keep the end tape inside the top 2 cm band, stop the back seam tape 3 cm below the top, and snip the notch just below the band, so the tear runs across bare paper on both sides. If it still tears crooked, the opener can just pull along from the notch slowly.

How long does it take?

About 15 minutes for your first bag, most of it drawing. Once you know the folds, a bag takes 5 to 7 minutes, so a series of 3 fits in a 30-minute session.

Something off in this guide?

Tried it? Earn the badge

Rate it below and the Paper Blind Bags badge goes in your account.

How was it?

How much of a challenge was it?

Pass it on

Did you enjoy paper blind bags? Share it with your friends!

Someone you know has 15 spare minutes too.

Sign in

A free account: just your email, no password. We'll email you a link that brings you back here.

No password. We only use your email to sign you in. Privacy

blind bag

A small sealed package with a toy or collectible inside that you can't see until you open it.

Store-bought blind bags usually belong to a series, with a checklist on the back of every character you might get. Paper versions copy the idea with hand-drawn packaging and handmade surprises.

back seam

The overlapping join that runs down the back of a pouch, where the two edges of the paper are taped together.

Putting the seam on the back leaves the front as one smooth panel to draw on, the way snack and blind-bag packets are made.

series checklist

The list on the back of a blind bag that shows every character in the set, so collectors know what they might get.

pull

Collector slang for the item you got when you opened a blind bag or pack.

crimp lines

The rows of tiny ridges pressed into the sealed ends of foil and plastic packets. Here they are drawn on with a pen.

tear notch

A small cut in the edge of a sealed packet that gives a tear a starting point, so it opens by hand.

Get new hobbies by email

A short email when new hobbies and new levels land. No spam, unsubscribe anytime.

We only use your email to send these. Privacy

Tell us what you think

We only use your email to reply. Privacy